Residential · Denver, CO
A concrete retaining wall should solve grade changes for decades, not crack, lean, or trap water behind it. Serving Denver since 2017, Quality Concrete Denver builds poured and CMU retaining walls for residential yards, commercial sites, driveways, and parking lots with drainage, reinforcement, and clean finishes.
Every retaining wall starts with layout, excavation, and a footing that matches the loads and soil conditions. We cut back unstable slopes, over-excavate soft spots, and build a compacted base with road base or 3/4-inch crushed stone, placed in lifts and compacted with a plate compactor. Footings are formed level, reinforced with rebar (commonly #4), and poured with ready-mix concrete, typically 3,500-4,000 psi depending on design. Before the pour, we verify elevations, batter, and step-footing locations so the wall stays plumb and the cap lines up cleanly.
Freeze-thaw cycles, expansive clays, and spring runoff make drainage and detailing non-negotiable in this region. We place perforated drain tile at the heel, surround it with clean drain rock, wrap with geotextile fabric, and add weep holes where appropriate to relieve hydrostatic pressure. Control joints, coping details, and reinforcement placement are planned to reduce random cracking and keep the face straight. Finish options include smooth-form, light sand-float, broom-finish caps for slip resistance, and integral color or stain for architectural walls, with sealed surfaces when you want easier cleanup and longer color life.
Denver customers choose us because we build walls like structural concrete, not landscaping blocks stacked on dirt. Our crews use forming systems, laser levels, rebar tying tools, and proper consolidation methods to reduce honeycombing and voids, and we stage backfill only after the concrete has gained strength. You get clear scope, written measurements, and straightforward options for height, thickness, pilasters, steps, and cap style, with drainage and waterproofing explained in plain language. We are licensed and insured, and we keep the jobsite safe and organized so your driveway, sidewalks, and adjacent flatwork are protected during excavation and placement.
At closeout, we walk the full line of the wall with you, checking plumb, top elevation, corner alignment, and finish consistency. We confirm drainage outlets are open, backfill is graded to shed water, and any nearby concrete or landscape edges are restored as agreed. You receive a free written estimate up front, then a defined plan for footing depth, reinforcement, drainage, and finish before work begins, plus care guidance for curing and sealing. The result is a concrete retaining wall built to hold grade, manage water, and look finished from day one.
Yes. We provide a free written estimate with the scope, square footage assumptions, and key construction details such as thickness, reinforcement, and finish.
Yes. We can saw-cut and break out existing concrete, haul off debris, rework the base, and pour the replacement slab with new jointing and edges.
Common options include broom-finish for traction, steel trowel where appropriate, exposed aggregate, and stamped concrete with color and sealer options. We will recommend a finish based on use and slip resistance.
Requirements vary by municipality and scope. We will tell you what is typically needed for your type of project and can coordinate with local permitting when applicable.
Pricing is based on square footage, thickness, demolition needs, access, base work, reinforcement, finish, and site conditions like drainage or elevation changes. We spell these factors out in the estimate.
If you need a concrete retaining wall, the long-term success comes down to three things, footing support, steel reinforcement, and drainage. Quality Concrete Denver builds retaining walls that stabilize slopes, create usable outdoor space, and protect driveways, parking areas, and foundations from soil movement. We work with poured-in-place concrete and reinforced CMU block walls, and we help you choose the right approach based on wall height, access, and the amount of load behind the wall.
A properly built concrete retaining wall begins with site evaluation and layout, then excavation to undisturbed soil or a stable subgrade. We form and pour a reinforced footing, set vertical and horizontal steel per plan, and build the wall with quality forms or grouted CMU cores. Concrete is ordered to the right strength class for the application, placed efficiently, and consolidated to minimize voids. Control joints and cap details are planned so the wall looks consistent and performs through seasonal temperature swings.
Drainage is the difference between a wall that lasts and a wall that fails early. We install perforated pipe at the base, surround it with clean aggregate, and separate soil from drain rock with geotextile to prevent clogging. Where needed, we add weep holes and waterproofing on the soil side, then backfill in lifts with proper compaction and final grading to move surface water away from the wall.
When you hire Quality Concrete Denver, you get a retaining wall built as a real concrete system, not a shortcut. We provide a free written estimate, explain options clearly, and deliver a finished wall that holds grade, manages water, and complements the surrounding flatwork and landscaping.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Denver. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
